USB HiPro


Compare

USB HiPro Hearing Aid Programming Interface

 

25,200.00

Descriptions :

This digital hearing aid programmer is used for resetting the parameters and programming of hearing aids.

This digital hearing aid programming unit together with fitting software and programming cables constitute the complete system. It serves as a standardized interface between a PC and programmable hearing instruments.

Technical Parameters :

PC interface

USB connecting line(Universal Serial Bus port)

For the computer and USB programming connection

Power Supply :

USB The programming voltage enter from the USB port.
Voltage:4.50V-5.25V
Max Current:<500 m A(2.5W)
Static Working Current:<500uA(2.5mW)

Output Range :

The following output is for the left and right ears of the hearing aid device cable

Common install battery,apply to left and right ears, 1.35V, 10/50m A (Current can be adjust by install the software )
Programmable battery,apply to left and right ears, -3.50V to +3.50V, 30m A(Voltage can be adjust by install the software)

Suitable Operating Conditions :

Temperature : +5°Cto+40°C(41°Fto+104°F)

Humidity : 30 to 90%,non-condensing
Preheating Time: Atmospheric Pressure: 600hpa to 1060 hpa

Notice : Operate product in the temperature enviroment under -20°C or over 60°C,might cause permanent damage to the product.

Maintain and Sending Conditions :

Temperature: -25°C to +70°C(-13°F to +158°F)

Humidity: <90%,non-condensing
Atmospheric Pressure: 500hpa to 1060hpa

Package Content :

1 x USB CABLE 

1 x Installation CD (Driver software)

1 x Instruction manual (English)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “USB HiPro”

There are no reviews yet.

Looking for a hearing aid?

Get the best deal here

You have successfully submitted to the newsletter

There was an error while trying to send your request. Please try again.

will use the information you provide on this form to be in touch with you and to provide updates and marketing.